|
Code | 3.030698 |
|
|
Heat pump heat output C.H. kW | 3,98 |
|
|
Gas boiler heat output C.H. kW | 24,1 |
|
|
Heat pump dimensions (HxWxD) mm | 745 x 845 x 350 |
|
|
Gas boiler dimensions (HxWxD) mm | 748 x 440 x 268 |
|
|
Refrigerant gas | R32 |
|
|
D.H.W. production (∆t 30°C) l/min | 13,7 |
A++
A
Solution for winter heating only and production of domestic hot water, designed for rise energy efficiency in the replacement of old generators also on heating systems up to 80 °C. Composed of a monobloc heat pump and a condensing boiler, connected in series.
• Instantaneous domestic hot water production (only with internal condensing unit)
• Remote control panel (with chronothermostat function) as standard
• Buffer tank necessary only for systems with water content less than 20 litres
• As standard in the external unit: external probe, anti-vibration supports, filter, shut-off knobs and antifreeze thermostatic valve that avoids glycol
insertion in the system
• Internal condensing unit approved also for installation in partially protected place
ON/OFF room thermostat.
Class of device IV* or VII
Contribution to the environmental heating seasonal energy efficiency 2%* or 3,5%
* default settings
ON/OFF room thermostat.
Class of device IV* or VII
Contribution to the environmental heating energy efficiency 2%* or 3,5%
* default settings
For buildings not equipped with telephone network. Available for all Immergas models.
For buildings equipped with telephone network. Available for all Immergas models.
Suitable to install it under external unit it is necessary adapter kit code 3.030915
Stainless steel storage tank units for DHW
Individual solar components
The range of new INOXSTOR stainless steel solar
storage tanks, is ideal to contain domestic hot water
with an inspection flange at the lower part.
The storage tanks are equipped with:
• 2 stainless steel coils water/water heat exchangers
• 2 probe-supports and NTC probe for Immergas
boiler connection < 35 kW
• thermometer
• double magnesium anode
• suitable flexible insulation which can be
disassembled (6 cm thick)
• pre-arranged to fix pump station to the body of the
storage tank
• pre-arranged to double electronic anode (optional)
code 3.025003
The use of this storage tank unit involves the installation of an appropriately
sized DHW expansion vessel and safety valve, not included in the supply.
The range of new OMNISTOR stainless steel storage
tanks, is ideal to contain domestic hot water with an
inspection flange at the lower part.
The storage tanks are equipped with:
• 1 stainless steel coils water/water heat exchanger
with oversized coil
• 2 probe-supports and NTC probe for Immergas heat
pump connection
• Thermometer
• Double magnesium anode
• Suitable flexible insulation which can be
disassembled (6 cm thick on OMNISTOR 300 and 8
cm thick on OMNISTOR 500)
• Pre-arranged to fix pump station to the body of the
storage tank with option kit (maximum 4 solar flat
plate-collectors)
• Pre-arranged to double electronic anode (option)
code 3.025003
Stainless steel storage tank units for DHW
Individual solar components
The range of new INOXSTOR stainless steel solar
storage tanks, is ideal to contain domestic hot water
with an inspection flange at the lower part.
The storage tanks are equipped with:
• 2 stainless steel coils water/water heat exchangers
• 2 probe-supports and NTC probe for Immergas
boiler connection < 35 kW
• thermometer
• double magnesium anode
• suitable flexible insulation which can be
disassembled (6 cm)
• pre-arranged to fix pump station to the body of the
storage tank
• pre-arranged to double electronic anode (optional)
code 3.025003
The use of this storage tank unit involves the installation of an appropriately
sized DHW expansion vessel and safety valve, not included in the supply.
The range of new OMNISTOR stainless steel storage
tanks, is ideal to contain domestic hot water with an
inspection flange at the lower part.
The storage tanks are equipped with:
• 1 stainless steel coils water/water heat exchanger
with oversized coil
• 2 probe-supports and NTC probe for Immergas heat
pump connection
• Thermometer
• Double magnesium anode
• Suitable flexible insulation which can be
disassembled (6 cm thick on OMNISTOR 300 and 8
cm thick on OMNISTOR 500)
• Pre-arranged to fix pump station to the body of the
storage tank with option kit (maximum 4 solar flat
plate-collectors)
• Pre-arranged to double electronic anode (option)
code 3.025003
Anti freeze protection kit -15 °C
For TT versions, VICTRIX SUPERIOR/PLUS, VICTRIX ZEUS, VICTRIX EXA, TERA VIP, VICTRIX TERA/PLUS, OMNIA, MAGIS PRO V2 and MAGIS COMBO V2.
Magnetic cyclone filter kit to prevent system ferrous residual (only for internal installation).
Available for wall-hung condensing boilers.
For wall-hung outdoor boilers.
For wall-hung combi boilers and also for wall-hung with built-in storage tank.
For VICTRIX SUPERIOR, MAIOR TT ErP, TT ErP, TT, EXA ErP, TERA, TERA VIP and MAGIS COMBO V2.
For wall-hung boilers: compact condensate drain pump kit.
For wall-hung condensing boilers.
UNA GRANDE SICUREZZA IN PIÙ
5 anni di estensione di garanzia per pompe di calore e sistemi ibridi Immergas con garanzia di intervento di Centri Assistenza certificati F-Gas.
CON ATTIVAZIONE GRATUITA
Tutte le caldaie con potenza inferiore a 35 kW, possono avere 10 anni di garanzia senza costi di attivazione. In più l’estensione può arrivare fino a 15 anni.
PIÙ SICUREZZA PER GRANDI IMPIANTI
5 anni di estensione di garanzia per le caldaie di Alta Potenza Immergas tra 36 e 200 kW destinate agli impianti più grandi.
E RISPARMIO IMMEDIATO
La qualità Immergas anche a rate: dalle caldaie a condensazione agli impianti con energie rinnovabili.
Detrazioni e incentivi permettono di avere la qualità Immergas in modo più conveniente anche nel 2020. Tutte le soluzioni da scegliere in vigore.
