EOLO Maior kW is the wall-mounted boiler with sealed chamber and forced draught that's approved for operation both indoors and outdoors in partially protected places, so as to gain space inside buildings. It features an elegant Schumann design with covered control panel. This, along with a compact size, makes the boiler well able to blend in with other wall units and furnishings while meeting all types of planning requirement since it is available with 24 kW, 28 kW and 32 kW power ratings.
The EOLO Maior kW boiler features the new high-performance hydraulic unit, and can also cope with small service requirements or low domestic water inlet pressure values. It is also simple to use thanks to user-friendly electronics, while the controls and signals are easy to interpret. The boiler can be used in conjunction with the exclusive Amico Remote Control and external probe (both optional) which allow it to be controlled, monitored and programmed at a distance in an extremely simple way, thus optimizing its operation through climatic thermoregulation.
All the boilers in the EOLO kW series are equipped with an antifreeze system that protects them down to a temperature of -5°C. Thanks to a special kit (optional), the boiler can be connected to a separate 80, 105, 120, or 200 litres capacity storage tank manufactured by Immergas. This accessory ensures an abundant production of hot water and is particularly ideal for homes with several bathrooms or whenever lots of hot water is needed quickly.
EASY AND QUICK TO INSTALL Designed to guarantee easy and quick installation. Once the boiler has been lifted, it can be hooked onto the adjustable support bracket supplied. The bracket makes installation practical even in sites that are difficult or uncomfortable to access.
MICROPROCESSOR-CONTROLLED ELECTRONIC MODULATION Assures excellent hot water temperature control regardless of the amount of water drawn and an heat output proportioned to the system requirements. The electronic board can be combined with the Amico Remote Control and the external sensor (optionals). It is also equipped with a circulator anti-block system and antifreeze system (offering standard protection against temperatures as low as -5°C; an optional antifreeze kit is also available offering protection against temperatures as low as -15°C), as well as a plate exchanger pre-heating function. It can also be combined with a remote filling kit (optional) for use with the Amico Remote Control.
FLEXIBLE INDOOR OR OUTDOOR INSTALLATION The "Eolo" versions are approved for outdoor installation in partially protected places.
EXTENSIVE RANGE AVAILABLE EOLO Maior with sealed chamber and fan assisted 24, 28 or 32 kW available heat outputs. Every EOLO version has been awarded a three star energy mark, with subsequently higher energy savings compared to "traditional" products.