The Amico Remote Control allows to manage, control and program the boiler functioning remotely. It has been designed in order to offer ideal temperature conditions in each moment of day and night during the whole week. Main features of Immergas Amico Remote Control are the simplicity, the controls clarity and the easy connection to the boiler electronic board.
Through two wires only it interchanges data with the boiler and receives electrical supply.
The Amico Remote Control features:
integrated climatic thermoregulation which allows the boiler functioning optimization depending on the real heating needs of the system (changeable temperature of the primary circuit);
digital clock and timer/room thermostat;
display showing information about boiler functioning (auto diagnosis) and system.
User friendly controls
The sophisticated electronics of Amico Remote Control has been developed with a simple and intuitive control system, which offers the traditional knobs fitted on boilers control panel.
Anti-freeze protection: when the main knob is in OFF position the CAR switches on the boiler only if the room temperature decreases below 5°C (on the display the word OFF appears).
Summer position: the CAR enables the d.h.w. mode. The d.h.w. temperature setting is done by means of the specific knob. The display shows the value during the regulation.
Winter position: the CAR enables both the d.h.w. mode and heating mode. The specific knobs are used to set the required temperatures. The display shows the set values during the regulation.
Manual functioning: CAR works as a room thermostat in a temperature range between 5°C and 30°C.
Automatic functioning: 2 different levels of temperature (comfort and reduced) managed during the day hours and the week.
Automatic functioning with standard programme: Time of working and temperatures are defined by a standard programme pre-selected by IMMERGAS fitted as standard
Diagnostic: the CAR continuously controls the boiler functioning status and reports possible anomalies showing the related fault code on the display. During the standard functioning the display shows cyclically the delivery temperature, the set room temperature and the outside temperature (if the external probe has been installed).
Additional functions: the CAR room temperature sensor can be deactivated. The CAR can work in ON-OFF or modulating functioning mode. The CAR is regulated by the manufacturer in modulating mode, but it is possible to exclude the modulating functioning mode and to activate the ON-OFF mode.
Boiler with external sensor: if the boiler is pre-arranged for the external sensor installation, turning the heating temperature knob it is possible to select the ratio between delivery temperature and external temperature among 9 pre-set straight lines. The display shows a number between 1 and 9 representing the selected straight line.
Boiler connection by means of 2 wires cable with polarity
Pre-arrangement for the telephonic remote control connection